|
- Mechanical and physical property testing
- Metallographic analysis
- Failure analysis
- Weld material and weld quality evaluation
- Material selection and development of material specifications
- Development of cleaning processes and foreign material
control
|
- Tension and compression (to 300,000 lbs.)
- Bend testing
- Charpy V-notch impact (down to -320 F)
- Drop weight (down to -320 F)
- Hardness (macro and micro)
- Metallography (macro and micro)
- Diffusible hydrogen
- Covered electrode moisture determination
- Corrosion
- Heat treatment
|
- Carbon and low alloy steels
- Stainless steels
- Quenched and tempered steels
- Tool steels
- Nickel based alloys
- Titanium
- Aluminum
- Copper based alloys
|
|
Our Materials Engineering staff, with experience in
a wide range of industrial problems, is available for
consulting and failure analysis. PCC offers an integrated
approach to product failure investigations whereby design
analysis and metallurgical evaluation are combined to
provide a complete analysis of the problem. Analyses
have been performed for both service and manufacturing
failures. On site as well as laboratory analyses are
possible. Comprehensive reports with test results, conclusions
and recommendations will be provided in each case.
PCC's extensive experience in welding of various types
of materials puts us in a unique position to evaluate
your welding development needs. Optimum chemical and
physical properties of the weld metal and heat affected
zone can be developed.
Additional areas where we can be of service include:
product development, corrosion investigations, cleanliness
control and contamination analysis.
|
|
PCC's Metallographic laboratory can provide a complete
microstructural evaluation of your test specimens.
Sample preparation, mounting, polishing and etching
is available for a wide variety of materials. Our
services include: microstructure evaluation, grain
size determination, heat treatment evaluation, microhardness
testing, and inclusion rating determination. On-site
Metallography services are also available.
PCC's tensile testing equipment is capable of testing
both full size and sub-size specimens and can generate
loads up to 300,000 lbs. Our 264 ft.-lb. Charpy impact
machine can test a full temperature range from +212°
F to -320° F, and complete transition curves can
be provided. Rockwell hardness testing can be performed
on all scales, including superficial, and a portable
hardness testing service can be provided. Additional
mechanical testing services include: bend testing
and drop weight testing. All testing is performed
in accordance with the applicable specifications,
and all testing equipment is calibrated to National
Standards.
|
Precision Custom Components
c/o Marketing Department
P.O. Box 15101
York, PA 17405-7101
PHONE: (717) 848-1126 ext. 2400 - FAX: (717) 843-5733
or e-mail mktg@pcc-york.com-Marketing
Department
mail@pcc-york.com-General
Information
|
